Determining PID Parameters For Temperature Control System in Cavendish Banana Storage Room
Menentukan Parameter PID Untuk Sistem Kendali Suhu Pada Ruang Penyimpanan Pisang Cavendish
Abstract
Banana is one of the most popular fruits in Indonesia, and its freshness will be the top priority for consumers in choosing it. After packaging, special treatment needs to be done in the banana storage room. One of them is to keep the temperature of the storage room stable. The temperature of the room between 5oC to 10oC is the ideal temperature for storing bananas, the Control system offered is PID with the Ziegler-Nichols method to get the values of Kp, Ki and Kd. Determination of Kp, Ki and Kd values is very important to get good system stability and a small error. The tuning rule of Ziegler-Nichols 1 method can be applied to obtain the values of Kp, Ki and Kd. With several steps taken, the values of L = 90s and T = 206s are obtained and referring to the Ziegler-Nichols 1 table, the values of Kp = 2.7, Ki = 0.015 and Kd = 121.5 are determined.
References
K. F. Alamanda, “Pengaruh Tingkat Kematangan Buah, Pelapisan Buah, Dan Suhu Simpan Terhadap Mutu Dan Masa Simpan Buah Pisang Cavendish.” Universitas Lampung, 2023.
I. M. Arti and M. E. E. Miska, “Perubahan mutu fisik pisang cavendish selama penyimpanan dingin pada kemasan plastik perforasi dan non-forasi,” UG J., vol. 14, no. 11, 2021.
S. Anam and M. A. Royyan, “Perancangan ruang penyimpanan dingin sebagai media pematangan pisang cavendish dengan kapasitas 3, 5 ton,” Ismetek, vol. 14, no. 1, 2022.
M. Andrian, A. Kurniawan, and I. Saukani, “Sistem Kendali Suhu Menggunakan Metode PID dalam Proses Deasetilasi Kitin,” TEKTONIK J. Ilmu Tek., vol. 1, no. 2, pp. 131–137, 2024.
R. H. Yunanto, D. Desriyanti, and R. I. Vidyastari, “Analysis Of Response Speed Settings Flame Sensor Fire Fighting Robots Using Pid,” JEEE-U (Journal Electr. Electron. Eng., vol. 5, no. 2, pp. 175–185, 2021. DOI: https://doi.org/10.21070/jeeeu.v5i2.1550
I. Irianto, S. Suhariningsih, and V. R. Dewanti, “Rancang Bangun Alat Pengering Pelepah Pisang (Menggunakan Metode Controller Chien Regulator I dan Chien Servo I Sebagai Tuning Kontrol PI),” JEEE-U (Journal Electr. Electron. Eng., vol. 2, no. 1, pp. 1–7, 2018. DOI: https://doi.org/10.21070/jeee-u.v2i1.1091
M. Ali, A. Raikhani, B. Budiman, and H. Sopian, “Algoritma Persaingan Imperialis Sebagai Optimasi Kontroler PID dan ANFIS Pada Mesin Sinkron Magnet Permanen,” JEEE-U (Journal Electr. Electron. Eng., vol. 3, no. 1, pp. 57–81, 2019. DOI: https://doi.org/10.21070/jeee-u.v3i1.2023
H. Lajuardhie, A. S. Satyawan, A. Faroqi, and F. A. Rasyid, “A Steering Stability Control for A Three-Wheeled Autonomus Electric Vehicle,” in 2022 8th International Conference on Wireless and Telematics (ICWT), 2022, pp. 1–5. DOI: https://doi.org/10.1109/ICWT55831.2022.9935468
C. Wiharya, H. Sungkowo, A. S. Suryandari, and B. I. Kurniawan, “Design and optimization of digitalization device of temperature control system using PID Ziegler-Nichols control in chemical engineering laboratory,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1073, no. 1, p. 12051. DOI: https://doi.org/10.1088/1757-899X/1073/1/012051
Z. B. Janin, “Derivative Proportional Integral Controller For Glycerin Heating Process,” 2021.
E. M. Sartika and K. V. Zefanya, “Sistem Pengendalian Proses Penyangraian Biji Kakao,” 2023. DOI: https://doi.org/10.31219/osf.io/s5db6
R. Arifuddin and Y. Sinatra, “Identifikasi Sensor Suhu pada Setup Awal Untuk Pengukuran Suhu Bawah Permukaan,” JEECAE (Journal Electr. Electron. Control. Automot. Eng., vol. 3, no. 2, pp. 209–212, 2018. DOI: https://doi.org/10.32486/jeecae.v3i2.287
R. Arifuddin, D. R. Santoso, and O. Setyawati, “Pengembangan Sistem Akuisisi Data Nirkabel untuk Pengukuran Distribusi Suhu Bawah Permukaan,” J. EECCIS, vol. 9, no. 2, pp. 123–129, 2016.
Copyright (c) 2024 Rahman Arifuddin, Subairi Subairi, Aries Boedi Setiawan, Muhammad Ali Ridlo, Alsaro Natanael Ziliwu
This work is licensed under a Creative Commons Attribution 4.0 International License.