Characteristic Test of Current Transformer Based EMTP Shoftware:

Ramadoni Syahputra

doi:10.21070/jeee-u.v1i1.22

(1) * Ramadoni Syahputra Jurusan Teknik Elektro Fakultas Teknik Universitas Muhammadiyah Yogyakarta
Indonesia
(*) Corresponding Author

DOI: https://doi.org/10.21070/jeee-u.v1i1.22

Abstract

Pemodelan transformator arus merupakan salah satu cara yang praktis untuk mengevaluasi unjuk kerja perlengkapan proteksi. Pada makalah ini disajikan penggunaan perangkat lunak Electromagnetic Transients Program (EMTP), The Output Processor (TOP), dan Mathcad® untuk memodelkan transformator arus (CT) untuk mendapatkan kurva yang menunjukkan karakteristik transformator arus. Disajikan juga pengaruh beban terhadap faktor koreksi rasio dan faktor koreksi sudut fasa transformator arus.
Dalam makalah ini transformator arus dimodelkan menggunakan EMTP untuk memvisualkan arus dan tegangan CT. Keluaran dari EMTP ditransfer ke dalam Mathcad melalui perangkat lunak TOP untuk menguji transformator arus terhadap keakuratan dan pengaruh bebannya. Model transformator arus yang dibahas adalah model CT 1200/5 kelas C800. Hasil simulasi menunjukkan bahwa untuk uji karakteristik dengan metode 9 titik memberikan hasil yang terbaik untuk menampilkan karakteristik CT. Hasil simulasi uji eksitasi CT menunjukkan bahwa error rasio maksimum yang terjadi adalah 0,09%. Hasil simulasi ini mengindikasikan bahwa transformator arus ini dapat digunakan dalam aplikasi pengukuran.

References

IEEE Team, “IEEE Standard Requirements for Instrument Transformers”, IEEE Std C57.13-1993, The Institute of Electrical and Electronics Engineers, New York, 1993.

R. Syahputra, Distributed Generation: State of the Arts dalam Penyediaan Energi Listrik. LP3M UMY, Yogyakarta, 2012.

Kang, Y.C., Park, J.K., Kang, S.H., Johns, A.T., and Anggarwal, R.K., 1997, “An Algorithm for Compensating Secondary Currents of Current Transformers”, IEEE Transactions on Power Delivery, Vol. 12, No. 1, pp 116 – 124. DOI: https://doi.org/10.1109/61.568231

Kezunovic, M., Kojovic, Lj., Fromen, C.W., Sevcik, D.R., and Phillips, F., 1994, “Experimental Evaluation of EMTP-Based Current Transformer Model for Protective Relay Transient Study”, IEEE Transactions on Power Delivery, Vol. 9, No. 1, pp 405-413. DOI: https://doi.org/10.1109/61.277712

Chaudhary, A.K.S., Tam, K.S., Phadke, A.G., 1994, "Protection System Representation In The Electromagnetic Transients Program", IEEE Transactions on Power Delivery, Vol. 9, No. 2, pp. 700-711. DOI: https://doi.org/10.1109/61.296247

R. Syahputra, I. Robandi, and M. Ashari, “Performance Analysis of Wind Turbine as a Distributed Generation Unit in Distribution System”, International Journal of Computer Science & Information Technology (IJCSIT) Vol 6, No 3, pp. 39-56, June 2014. DOI: https://doi.org/10.5121/ijcsit.2014.6303

R. Syahputra, I. Robandi, M. Ashari, Modeling and Simulation of Wind Energy Conversion System in Distributed Generation Units, 3rd International Seminar on Applied Technology, Science and Arts (APTECS), 2011, pp. 290-296.

R. Syahputra, I. Robandi, and M. Ashari, Reconfiguration of Distribution Network with DG Using Fuzzy Multi-objective Method, Int. Conference on Innovation, Management and Technology Research (ICIMTR), May 21-22, 2012, Melacca, Malaysia. DOI: https://doi.org/10.1109/ICIMTR.2012.6236410

R. Syahputra, I. Robandi, and M. Ashari, Distribution Network Efficiency Improvement Based on Fuzzy Multi-objective Method. IPTEK Journal of Proceedings Series. 2014; 1(1): 224-229. DOI: https://doi.org/10.12962/j23546026.y2014i1.422

R. Syahputra, “Fuzzy Multi-Objective Approach for the Improvement of Distribution Network Efficiency by Considering DG”, IJCSIT, Vol. 4, No. 2, pp. 57-68, April 2012. DOI: https://doi.org/10.5121/ijcsit.2012.4205

R. Syahputra, I. Robandi, and M. Ashari, “Optimization of Distribution Network Configuration with Integration of Distributed Energy Resources Using Extended Fuzzy Multi-objective Method”, International Review of Electrical Engineering (IREE), vol.9, no.3, 2014. pp.629-639. DOI: https://doi.org/10.15866/iree.v9i3.956

R. Syahputra, I. Robandi, and M. Ashari, “Optimal Distribution Network Reconfiguration with Penetration of Distributed Energy Resources”, in Proceeding of ICITACEE 2014, Semarang, Indonesia, 2014. DOI: https://doi.org/10.1109/ICITACEE.2014.7065777

R. Syahputra, I. Robandi, and M. Ashari, “Performance Improvement of Radial Distribution Network with Distributed Generation Integration Using Extended Particle Swarm Optimization Algorithm”, International Review of Electrical Engineering (IREE), vol.10, no.2, 2015. pp.293-304. DOI: https://doi.org/10.15866/iree.v10i2.5410

R. Syahputra, I. Robandi, and M. Ashari, “PSO Based Multi-objective Optimization for

Reconfiguration of Radial Distribution Network”, International Journal of Applied Engineering Research (IJAER), vol.10, no.6, 2015. pp. 14573-14586.

Characteristic Test of Current Transformer Based EMTP Shoftware

Uji Karakteristik Perangkat Lunak EMTP Berbasis Transformator Saat Ini

Abstract

References